You can use almost any beads on the links, experiment with shapes and colours. I love these miracle beads as they shimmer so much with movement.
You will need:
- 0.8mm or 0.6mm Wire
- Closed Jump Rings
What you do:
- Take the wire and thread it through the jump ring, twisting the short end around the longer end for about 3 wraps.
- Thread on your chosen beads, then bend the wire back on itself, leaving a loop shape at the top.
- Add another ring into the loop and again, thread the wire around itself three times. Trim off the excess and tuck in any sharp edges with a pair of long nose pliers.
- Continue to link in this way until your chain is the required length.